Table
Bus Options | On some models, allows you to enable or disable: |
| ● PCI SERR# Generation. Default is enabled. |
| ● PCI VGA Palette Snooping, which sets the VGA palette snooping bit in PCI configuration |
| space; only needed when more than one graphics controller is installed. Default is disabled. |
|
|
Device Options | Allows you to set: |
| ● Num Lock State at |
| ● Integrated Video (enable/disable). Use this option to disable the integrated video controller |
| when another video controller is present in the system. Default is enabled. |
| ● NIC Option ROM Download (PXE, iSCSI, disabled). The BIOS contains an embedded NIC |
| option ROM to allow the unit to boot through the network to a PXE server. This is typically used |
| to download a corporate image to a hard drive. The NIC option ROM takes up memory space |
| below 1MB commonly referred to as DOS Compatibility Hole (DCH) space. This space is |
| limited. This F10 option will allow users to disable the downloading of this embedded NIC |
| option ROM thus giving more DCH space for additional PCI cards which may need option |
| ROM space. The default will be to have the NIC |
|
|
11