If you encounter
System will not boot from
| Cause | Solution |
|
|
|
|
|
| The device is attached to a SATA port that has been disabled | Run the Computer Setup utility and ensure that the SATA |
|
|
| controller is enabled. |
|
|
|
|
|
| in the Computer Setup utility. | Try a bootable CD in the drive. |
|
|
|
|
|
| Run the Computer Setup utility and change boot sequence. |
| |
|
|
|
|
| Drive not found (identified). |
|
|
|
|
|
|
| Cause | Solution |
|
|
|
|
|
| Cable could be loose. | Check cable connections. |
|
|
|
|
|
| The system may not have automatically recognized a newly | See reconfiguration directions in the Solving Hardware |
|
| installed device. | Installation Problems on page 69 section. If the system still |
|
|
| does not recognize the new device, check to see if the device |
|
|
| is listed within Computer Setup. If it is listed, the probable |
|
|
| cause is a driver problem. If it is not listed, the probable cause |
|
|
| is a hardware problem. |
|
|
|
|
|
| The device is attached to a SATA port that has been disabled | Run the Computer Setup utility and ensure that the SATA |
|
| in Computer Setup. | controller is enabled. |
|
|
|
|
|
|
|
| |
|
|
|
|
| Cause | Solution |
|
|
|
|
|
| Drive is not connected properly or not properly configured. | See the documentation that came with the optional device. |
|
|
|
|
|
| Movie will not play in the DVD drive. |
|
|
|
|
|
|
| Cause | Solution |
|
|
|
|
|
| Movie may be regionalized for a different country. | See the documentation that came with the DVD drive. |
|
|
|
|
|
| Decoder software is not installed. | Install decoder software. |
|
|
|
|
|
| Damaged media. | Replace media. |
|
|
|
|
|
| Movie rating locked out by parental lock. | Use DVD software to remove parental lock. |
|
|
|
|
|
| Media installed upside down. | Ensure the disc is inserted with the label facing up and |
|
|
| centered in the tray. |
|
|
|
|
|
75