Installing and Removing Drives
When installing additional drives, follow these guidelines:
●The primary Serial ATA (SATA) hard drive must be connected to the blue primary SATA connector on the system board.
●Connect a SATA optical drive to the white SATA connector on the system board..
●Connect a media card reader USB cable to the USB connector on the system board.
●The system does not support Parallel ATA (PATA) optical drives or PATA hard drives.
CAUTION: To prevent loss of work and damage to the computer or drive:
If you are inserting or removing a drive, shut down the operating system properly, turn off the computer, and unplug the power cord. Do not remove a drive while the computer is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid touching the connector.
Handle a drive carefully; do not drop it.
Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields such as monitors or speakers.
If a drive must be mailed, place the drive in a
30