Contactless card

A contactless card is a small plastic card containing a computer chip. If a contactless card reader is connected to the computer, if the associated driver from the manufacturer has been installed, and if a contactless card has been selected as an authentication credential, you can use your contactless card for authentication. The following types of contactless cards are supported by HP ProtectTools:

●Contactless HID iCLASS memory cards

●Contactless MiFare Classic 1k, 4k, and mini memory cards

▲To set up your contactless card, place it very close to the reader, follow the on-screen instructions, and then click Apply.

Proximity card

A proximity card is a small plastic card containing a computer chip. If a proximity card reader is connected to the computer, if the associated driver from the manufacturer has been installed, and if a proximity card has been selected as an authentication credential, you can use a proximity card in conjunction with other credentials for additional security.

▲To set up your proximity card, place it very close to the reader, and then click Apply.

Bluetooth

If the computer is equipped with Bluetooth® functionality, if Bluetooth has been selected as an authentication credential, and if a Bluetooth phone is paired with the computer, you can use your Bluetooth phone in conjunction with other credentials for additional security. Specify the Bluetooth settings:

▲To allow silent authentication, select the check box, and then click Apply.

PIN

If PIN has been selected as an authentication credential, you can use a PIN in conjunction with other credentials for additional security. Specify the PIN settings:

1.Click the up or down arrow to select the minimal PIN length. The maximum number of digits allowed is 8.

2.Click Apply.

Applications

The Settings page under Applications in the left panel of Administrative Console contains two tabs that allow you to customize the behavior of currently installed HP ProtectTools Security Manager applications.

▲In the left panel of Administrative Console, under Applications, click Settings.

Applications 21