NOTE: Only Bluetooth phone devices are supported.

1.Be sure that Bluetooth functionality is enabled on the computer, and that the Bluetooth phone is set in discovery mode. To connect the phone, you may be required to type an automatically generated code on the Bluetooth device. Depending on the Bluetooth device configuration settings, a comparison of pairing codes between the computer and the phone may be required.

2.To enroll the phone, select it, and then click Enroll.

3.Click OK on the confirmation dialog.

PIN

If the administrator has enabled a PIN as an authentication credential, you can set up a PIN in conjunction with other credentials for additional security.

▲To set up a new PIN, enter the PIN, and then enter it again to confirm it.

Administration

Administrators can access the Administrative Console and Central Management by clicking Administration and then selecting Administrative Console in the lower-left panel of the HP ProtectTools Security Manager User Console.

For more information, see the HP ProtectTools Administrative Console software Help.

Advanced

You can access the following options by clicking Advanced in the lower-left panel of the User Console:

●Preferences—Allows you to personalize settings for Security Manager.

●Backup and Restore—Allows you to back up and restore your Security Manager data.

●About—Displays version information about Security Manager

Setting your preferences

You can personalize settings for HP ProtectTools Security Manager. From the Security Manager User Console, click Advanced, and then click Preferences. Available settings are displayed on two tabs: General and Fingerprint.

General tab

Appearance—Show icon in taskbar notification area

●To enable displaying the icon on the taskbar, select the check box.

●To disable displaying the icon on the taskbar, clear the check box.

Fingerprint tab

My Logons 35