HP 6120 Changing RADIUS-ServerAccess Order, Figure 5-19.Example of RADIUS Accounting Information for a Specific Server

RADIUS Authentication, Authorization, and Accounting

Changing RADIUS-Server Access Order

Figure 5-19. Example of RADIUS Accounting Information for a Specific Server

Figure 5-20. Example Listing of Active RADIUS Accounting Sessions on the Switch

Changing RADIUS-Server Access Order

The switch tries to access RADIUS servers according to the order in which their IP addresses are listed by the show radius command. Also, when you add a new server IP address, it is placed in the highest empty position in the list.

Adding or deleting a RADIUS server IP address leaves an empty position, but does not change the position of any other server addresses in the list. For example if you initially configure three server addresses, they are listed in the order in which you entered them. However, if you subsequently remove the second server address in the list and add a new server address, the new address will be placed second in the list.

Thus, to move a server address up in the list, you must delete it from the list, ensure that the position to which you want to move it is vacant, and then reenter it. For example, suppose you have already configured the following three RADIUS server IP addresses in the switch:

5-50