HP 6120 Status, ext page, rev page, Security, From the Menu Interface:

	Configuring and Monitoring Port Security
	Reading Intrusion Alerts and Resetting Alert Flags
Log Listing with		Log Command
Security Violation		with
Detected		“security” for
		Search

Log Listing with No

Security Violation

Detected

Figure 11-17.Example of Log Listing With and Without Detected Security Violations

From the Menu Interface: In the Main Menu, click on 4. Event Log and use Next page and Prev page to review the Event Log contents.

For More Event Log Information. See “Using the Event Log To Identify Problem Sources” in the “Troubleshooting” chapter of the Management and Configuration Guide for your switch.

Web: Checking for Intrusions, Listing Intrusion

Alerts, and Resetting Alert Flags

1.Check the Alert Log by clicking on the Status tab and the [Overview] button. If there is a “Security Violation” entry, do the following:

a.Click on the Security tab.

b.Click on [Intrusion Log]. “Ports with Intrusion Flag” indicates any ports for which the alert flag has not been cleared.

c.To clear the current alert flags, click on [Reset Alert Flags].

To access the web-based Help provided for the switch, click on [?] in the web browser screen.

11-37