Traffic/Security Filters and Monitors

Filter Types and Operation

ProCurve(config)# show filter

Traffic/Security Filters

IDX Filter Type

Value

---------------

+

-------------------

1 Source

2

2Source Port

3Source Port 4

4Source Port 5

5Source Port 6

6Source Port 8

7Source Port 9

8Source Port 12

20Source Port 24

21Source Port 25

22Source Port 26

23Source Port 7

24Source Port 10

25Source Port 11

26Source Port 1

Indicates the port number or port- trunk name of the source port or trunk assigned to the filter.

An automatically assigned index number used to identify the filter for a detailed information listing. A filter retains its assigned IDX number for as long as the filter exists in the switch. The switch assigns the lowest available IDX number to a new filter. This can result in a newer filter having a lower IDX number than an older filter if a previous (source-port or named source-port) filter deletion created a gap in the filter listing.

Figure 9-7. Example of the show filter Command

Using the IDX value in the show filter command, we can see how traffic is filtered on a specific port (Value).The two outputs below show a non- accounting and an accounting switch port.

9-11