HP 6120 Figure 6-12.SSH Configuration and Client-Public-KeyListing From Figure

Configuring Secure Shell (SSH)

Configuring the Switch for SSH Operation

		ConfiguresManageruser-
		name and password.
ProCurve(config)#	password manager user-name leader
New password for Manager: ********
Please retype new	password for Manager: ********
ProCurve(config)#	aaa authentication ssh login public-key none
ProCurve(config)#	aaa authentication ssh enable tacacs local
ProCurve(config)#	coy tftp pub-key-file 10.33.18.117
ProCurve(config)#	write memory

Configures the switch to allow SSH access only for a client whose public key matches one of the keys in the public key file.

Copies a public key file named "Client-Keys.pub" into the switch.

Configures the primary and secondary password methods for Manager (enable) access. (Becomes available after SSH access is granted

Figure 6-11. Configuring for SSH Access Requiring a Client Public-Key Match and Manager Passwords

Figure 6-12 shows how to check the results of the above commands.

Lists the current SSH authentication configuration.

	Shows the contents of
	the public key file
	downloaded with the
	copy tftp command in
	figure 6-11. In this
	example, the file
Client Key Index Number	contains two client
	public-keys.

Figure 6-12. SSH Configuration and Client-Public-Key Listing From Figure 6-11

6-23