HP 72H3482 manual Windows NT Workstation Version Requirements

4Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0

Windows NT

Workstation

Version 4.0

Requirements

•HP Vectra VL8 with Windows NT Workstation 4.0 installed.

•IBM Turbo 16/4 TR adapter and drivers diskettes ver 2.1 Driver Name: IBMTOK5.SYS Size: 51KB Date: 9/28/96

•DOS and MS-Windows NT workstation 4.0 media.

•Microsoft NT 4.0 server that supports Net BEUI, TCP/IP, NWLink IPX/ SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

•	Interrupt	3
•	I/O Address	A20-A23
•	ROM Address	CC000-CDFFF
•	Token Ring Rate	16

Procedure

1With the HP Vectra VL8 turned off install the IBM Turbo 16/4 TR adapter card into an ISA slot.

2Insert the IBM TR drivers disk 1 of 4 and power on the machine.

3After the machine boots, select option 2 “IBM Turbo 16/4 Token-Ring ISA Configuration Using LANAIDC” and hit enter.

4When prompted, press any key to continue with the LANAID setup program.

5Type “/VIEW” to check the adapter settings and verify the data listed under device configuration.

6Remove the IBM TR drivers disk 1 of 4, power on the machine, and boot to Windows NT 4.0.

7After windows loads, log onto the machine with administrator privileges. (If you do not have the required information, contact your network administrator)

8Right-click on the Network Neighborhood icon and select “Properties”.

9Click on “YES” in the “Network Configuration” dialog box, and NT Networking will be installed on your computer.