2 Connecting to a Netware 4.11 Server
Windows 95 SR2
Windows 95 SR2 | Requirements |
| • HP Vectra with Windows 95 SR2 installed. |
| • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 |
| Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 |
| • Microsoft Windows 95 SR2 media. |
| • Novell Netware 4.1 server that supports Net BEUI, NWLink IPX/SPX, and |
| NWLink NetBIOS transfer protocols. |
Device Configuration
| Vectra VL8 | Vectra VE7/VE8 |
|
|
|
Interrupt | 10 | 3 |
|
|
|
I/O Address | A20 | |
|
|
|
Adapter Mode | Auto16 Compatible | - |
|
|
|
Configuration | Automatic | - |
|
|
|
RAM Address | - | |
|
|
|
RAM Size | 16 Kb | - |
|
|
|
ROM Address | - | |
|
|
|
Token Ring Rate | - | 16 |
|
|
|
Procedure
1With the HP Vectra turned off install the IBM Auto 16/4 TR adapter card into an ISA slot.
2Insert the IBM TR drivers disk 1 of 4 and power on the machine.
3After the machine boots, select option 2 “IBM Auto 16/4
4When prompted, press any key to continue with the LANAID setup program.
5Type “/VIEW” and verify the settings as listed above under the heading “Device Configuration.”
6Make any changes, exit LANAID, and remove the drivers diskette.
