3Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0
10In the Network Setup Wizard dialog box, make sure that “Wired to the Network” is checked and click on “Next”.
11Click on “Select from list” and click on “Have Disk” and set path to “A:\NT” (If you have a preloaded HDD, set path to “C:\Masters\LanDrv\Turbo164\DISK2\NT”)
12In the “Select OEM Option” dialog box, make sure that “IBM Shared RAM Token Ring Adapter” is highlighted and click on “OK” and then click on “Next”.
13Select all applicable protocols and click on “Next” (If you do not have the required information, contact your network administrator.).
14Select all required network services and click on “Next”(If you do not have the required information, contact your network administrator.).
15Click on “Next” to start component installation.
16Insert the Windows NT Workstation CD.
17In “Windows NT Setup”, set the path to your NT files and click on the “Continue” button. (If you have an HP preloaded HDD, set path to “C:\I386”)
18Setup will ask for your driver files location again. Enter “A:\NT” ”(If you have a preloaded HDD, set path to “C:\Masters\LanDrv\Turbo164\DISK2\NT”)
19Select “IBM Turbo 16/4
20Select the applicable I/O address and click on “OK.”
21Approve the default Bus Location and hit enter.
22Click on “Yes” or “No” for DHCP server setup ”(If you do not have the required information, contact your network administrator.).
23Set your IP address information in the “TCP/IP Properties” dialog box, and click “OK.”
24Click on “Next” to accept the default network binding settings.
25Click on “Next” to start NT networking.
26At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator.)
27To complete the installation, remove the floppy disk, and click on “Finish” button in the “Network Setup Wizard” dialog box.
