3 Connecting to a Windows NT Server 3.51
Windows 95 SR2
Windows 95 SR2 | Requirements |
| • HP Vectra with Windows 95 SR2 installed. |
| • IBM Auto 16/4 TR adapter and drivers diskettes ver 2.1 |
| Driver Name: NETIBM4.INF Size: 30KB Date: 1/30/98 |
| • Microsoft Windows 95 SR2 media. |
| • Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/ |
| SPX, and NWLink NetBIOS transfer protocols. |
Device Configuration
• | Adapter Mode | Auto16 Compatible |
• | Configuration | Automatic |
• | Interrupt | 10 |
• | I/O Address | A20 |
• | RAM Address | |
• | RAM Size | 16 Kb |
Procedure
1With the HP Vectra turned off install the IBM Auto 16/4 TR adapter card into an ISA slot.
2Insert the IBM TR drivers disk 1 of 4 and power on the machine.
3After the machine boots, select option 2 “IBM Auto 16/4
4When prompted, press any key to continue with the LANAID setup program.
5Type “/VIEW” and verify the settings as listed above under the heading “Device Configuration.”
6Make any changes, exit LANAID, and remove the drivers diskette.
7Reboot the machine and allow it to boot to Windows 95.
8Windows 95 SR2 should automatically recognize the IBM Auto 16/4 TR adapter card.
9Click on “Next”, and then click on “Finish.”
