![](/images/new-backgrounds/1153057/15305727x1.webp)
1. Holding the new hard drive by its edges, place it in the hard drive compartment. The right edge of the hard disk drive should be flush with the edge of the compartment.
When you remove the drive from its packaging, hold it only by its edges.
Keep the drive in its protective packaging until you’re ready to insert it.
Gather all the parts you need to complete the installation in one sitting.
Take precautions against damage from static electricity:
∙
∙
∙
Using OmniBook Disk Drives
Replacing a Hard Drive
To install a hard drive
After following the instructions for removing drive C, use the next procedure to install another hard drive.