![](/images/new-backgrounds/1153057/15305739x1.webp)
C A U T I O N
Using OmniBook Disk Drives
Restoring OmniBook Software
7.Exit Windows, if necessary, then reboot the OmniBook from the Support Utilities disk by pressing the reset button. (To restart from the floppy drive, the System Configuration Utility must have System, Boot Devices set to FDD First.)
8.Select the option Install Windows for Workgroups Drivers and HP Applications Software, which loads the special drivers you need with the OmniBook. It also loads
9.Select the WfW Install option appropriate for your
This
To restore an alternate operating system
The following procedure describes how to restore an alternate operating system and your original OmniBook software. These steps will delete any software or files you may have installed or created on your hard disk since the original
You provide the software to install the alternate operating system. You will need the
You can also find the drivers on the OmniBook’s hard drive under C:\OMNIBOOK\DRIVERS.
Before you start installing a new operating system, make sure the drivers you need will be accessible after the installation .
If you do not have a
1. Install your alternate operating system.