1Setting Up Your Printer with a Parallel Printer Cable
Step 3: Plug in the Power
1Leave the computer and the printer turned off.
2Lift open the cable access door on the back of the printer.
Note: If using an HP JetDirect External Print Server with your HP DeskJet 895C Series printer, go to “Setting Up Your Printer on a Network” on page 89.
3 Plug the power adapter’s cord firmly into the connector on the back of the printer.
4 Plug the appropriate end of the power cord into the power adapter.
5 Plug the other end of the power cord into an electrical outlet.
6410023
Note: Use only the Power button on the front of the printer to turn the printer on and off. Using a power strip, surge protector or a wall outlet switch to turn the printer on and off may cause premature failure.
4