3Creative Printing

5Get the banner paper ready for the printer:

a.From the stack of banner paper, tear off the number of sheets you need to print the banner. (You must have at least five sheets in the stack.)

b.Tear off and discard the perforated strips, if there are any.

c.Fan the stack so that the pages donÕt stick together in the printer.

6Put the paper into the lower IN tray so that the unattached edge is at the top of the stack. Insert the stackÕs top edge first into the IN tray until it stops.

7Slide the paper adjusters so that they fit snugly against the edges of the paper stack.

8Push the IN tray back in.

9Print the banner.

Unattached Edge

6410042

YouÕll notice that the printer goes through some start-up movements before it starts printing. Also, banner printing takes a while; it might be several minutes before you see the results.

10After your banner is printed, if the Resume light is blinking, press the Resume button as many times as needed until all the banner paper is out of the printer.

52

Page 60
Image 60
HP 810C, 880C, 830C, 895C manual Get the banner paper ready for the printer, Push the in tray back Print the banner