1Additional Setup Information

3Type the letter of the computerÕs floppy disk drive (usually A:\), followed by setup.exe then click OK.

4When the opening screen appears, click Install HP DeskJet 8xxC Series

Printer Software.

5When the HP License Agreement box appears, read the agreement and click Accept.

6Do one of the following:

¥If the printer is turned on and connected to the computer with the parallel printer cable, the setup program automatically detects the printer and the port to which it is connected. Just follow the instructions on the screen. Then, proceed to step 7.

¥If the printer is turned off or if the connection to the computer has not yet been made with the parallel printer cable, the setup program asks you to specify which port to use for the printer. Select an LPT-type port; the default setting of LPT1 is appropriate for most computers. Click Next and proceed to step 7.

7Follow the instructions on the screen.

If something goes wrong, go to ÒIf You have Problems InstallingÓ on page 23.

8When prompted, restart Windows.

Note: You must restart Windows before the printer software can run.

9Continue to follow the instructions on the screen.

10When the Communication Test box appears, click Test Printer Communication. Then do one of the following:

¥If the print test is successful, go directly to step 11.

¥If the test is unsuccessful, click Troubleshoot and try to correct this problem. If you cannot correct this problem, click OK. For more information about printer communications, go to ÒCommunications Test and Two-way Communications (Parallel Cable)Ó on page 24.

Note: The HP DeskJet 8xxC Series printer is automatically set as the default Windows printer. If you find that it is not the default Windows printer, go to ÒSetting the HP DeskJet Printer as the DefaultÓ on page 24.

11Proceed to ÒAlign the Inkjet Print CartridgesÓ on page 22.

25

Page 33
Image 33
HP 880C, 810C, 830C, 895C manual Printer Software