1Setting Up Your Printer with a USB Cable

USB Step 2: Plug in the Power

Note: Do NOT connect your USB cable between the printer and the computer. Make sure that the USB cable is NOT plugged into the computer at this point in the setup procedure.

1Leave the computer and the printer turned off.

2Lift open the cable access door on the back of the printer.

3 Plug the power adapterÕs cord firmly into the connector on the back of the printer.

4 Plug the appropriate end of the power cord into the power adapter.

5 Plug the other end of the power cord into an electrical outlet.

6410023

Note: Use only the Power button on the front of the printer to turn the printer on and off. Using a power strip, surge protector or a wall outlet switch to turn the printer on and off may cause premature failure.

13

Page 21
Image 21
HP 880C, 810C, 830C, 895C manual USB Plug in the Power