Settings
Define settings for the following AP parameters.
•AP Prefix: Specify the text to prefix to an AP when APs are numbered.
•Model: Select an AP model from the drop‐down list of commercially available AP models. Planner enables, disables, or changes the other properties in this dialog box based on the selected AP model.
•Select Radio: Select the radio from the drop‐down list.
•Radio Properties
¾SSID: Enter the SSID of the AP’s radio.
Click <Add> to add an SSID in the List of SSIDs.
¾List of SSIDs: Displays the list of SSIDs of the AP’s radio.
Click <Delete> to delete an SSID selected from the List of SSIDs.
¾Antenna: Select an antenna from the drop‐down list.
Click <More> to view additional details of the antenna. The Select Antenna dialog box appears which helps you add or select the antenna in a better manner, from the list of available antennae.
¾Orientation: Select a direction in which the antenna would radiate its power. The preview reflects the antenna radiation based on the antenna selected.
¾Active Protocol: Select an active protocol from the drop‐down list. Each radio can operate on any one of the protocols.
¾Channel: Select an operating channel for the selected protocol. Select the primary and secondary channels from the drop‐down list. The difference between the primary and secondary channel values is four units.
¾Waterfall Curve: Select a waterfall curve from the drop‐down list of available waterfall curves for the selected protocol.
101
3Com ® AirProtect Planner User Guide