Generating Output from Planner

You cannot edit the Work Order Number and Customer Name fields from this screen. However, you can edit the following details of the report:

¾Location Name: Specify the desired name of the building

¾Address 1, Address 2: Specify the desired address of the layout

¾City: Specify the city where the layout is located

¾State: Specify the state where the layout is located

¾Postal Code: Specify the postal code of the place where the layout is located

¾Country: Specify the country where the layout is located

Click <OK> to save the changes. Alternately, click <Cancel> to discard the changes.

•Report Options: Select the options that you want Planner to include in the Report.

¾BoM: Select to include the Bill of Material.

¾Introduction: Select to add an introduction on WLAN to the overall report.

¾Compliance Report: Select to generate a compliance report for devices, mentioning devices’ configuration.

¾WLAN Planning Reports: Select to include a complete set of RF maps. This enables you to select the following WLAN Planning options in the report.

™RF Maps: You can select one or more of the available views for the following:

ƒAP ViewsƒSensor ViewsƒProtocols

™Layout Options: Planner generates a report for one of the below specified layouts:

ƒCurrent LayoutƒAll Layouts

ƒSelected Layout(s): Select the checkbox of the desired layout.

™Statistics Option: Select to view the statistics for the following options:

ƒAll Defined AreaƒOnly Selected AreaƒArea not Covered by Defined AreaƒComplete Layout

•Choose Report Folder: Specify the path to the folder, or click <Browse> to navigate to the folder where you want to place the report output. The Browse for Folder dialog box appears where you can navigate to the desired folder.

Figure 139. Browsing for Folder

Click <Generate Report> to generate the report. Alternately, click <Cancel> to discard the action.

106

3Com ® AirProtect Planner User Guide