HP AirProtect Security Software Appendix C: File Level and Application Level Parameters, 1Region Settings in ToolsÆSettingsÆPreferencesÆAP Views

Appendix C: File Level and Application Level Parameters

Appendix C: File Level and Application Level Parameters

The following section presents an overview of the File level and the Application level parameters.

Table 1 File Level Parameters
	File Level Parameters	Data Type		Default Value		Minimum		Maximum
	Accuracy	Integer	1		1		4
	RSSI Calibration	Integer		-10 dB		-40 dB		40 dB
	Spillage Factor	Positive Integer	2		2		3
	Min Attenuation Factor	Real		2		1.6		4
	Max Attenuation Factor	Real	2		1.6		4
	Alpha	Real		-4		Not applicable		Not applicable
	Beta	Real		0.08		Not applicable		Not applicable
Table 2 Application Level Parameters
	Application Level	Data Type		Default Value		Minimum		Maximum
	Parameters
	Coverage Estimation	Integer	-40, -50, -55, -60			-100 dBm		-10 dBm
	Thresholds			dBm
	Sensor Detection	Integer		-85 dBm		-150 dBm		-20 dBm
	Threshold
	Sensor Redundancy	Integer	1		1		10
	Sensor Prevention	Integer		-65, -60, -55 dBm		-150 dBm		-20 dBm
	Thresholds			(low<medium<high)
	Device Transmit Power	Integer		13		0		20
	Channel View Threshold	Integer		-85 dBm		-150 dBm		-20 dBm
	AP Redundancy	Integer		1		1		10

In addition to these parameters, Planner also has the following application level parameters:

1Region Settings in ToolsÆSettingsÆPreferencesÆAP Views

2Default Access Point Settings

3Auto Channel Select

4‘Do not show this window again’ messages

5Color Palettes

6Report Base Folder

Note: The default installation values are selected when you install a new version of Planner.

110

3Com ® AirProtect Planner User Guide