Menu and Toolbar Options

Figure 65. Changing Location Properties – Local Material Repository Tab

5.5.10 Renumber Devices

Planner creates a default numbering label, namely 01, 02 …for the devices. For example, APs as AP01, AP02 …, while Sensors as Sensor01, Sensor02 …. If you delete a particular AP or Sensor, it can create a discontinuity. You can restore sequential

numbering using the Renumber Devices option. Select Renumber Devices from the Tools menu.

Figure 66. Tools Menu – Renumber Devices

You can do the following:

•Select Prefix to rename objects with a prefix as defined in the SettingsÆAP Defaults section.

•Select Layout Name, or select User Defined to enter a user‐defined name in the User Defined field to rename devices accordingly.

•Click <Renumber> to renumber the devices.

For example, if you choose the option Building Name, and the building name is ‘MyBuilding’, then Planner will number the APs as MyBuildingA01, MyBuildingA02, and Sensors will be numbered as MyBuildingS01, MyBuildingS02, and so on.

The system will behave similarly with Layout Name and User defined names.

55

3Com ® AirProtect Planner User Guide