Menu and Toolbar Options
•Add an AP
•Modify an AP
•Delete an AP
Add AP
Click <Add> to add an AP and specify the AP properties. The Add Access Point dialog box allows you to select and define radio properties.
Figure 42. AP Repository – Adding an AP
Add AP Properties
Manufacturer
Model
Available Radio
Add Radio
Delete Radio
Antenna
More
Antenna Detachable
Protocols
Waterfall Curve
Power
Advanced Parameters
Description
Enter the name of the manufacturer.
Enter the AP model.
Select the radio from the
Click to add a new radio to the AP. This takes you to the Radio Properties section in the dialog box.
Click to delete a radio.
Select the antenna type from the
Click to select or add a new antenna. For details, refer to the Antenna Repository section.
Select the checkbox, depending upon the type of antenna required.
Select any or all the protocols (802.11a, 802.11b, 802.11g, 802.11a/n, 802.11b/g/n).
Select the waterfall curve for the protocols from the
Specify the desired power range for each protocol. Enter a
Click to define advanced 802.11n parameters. The IEEE 802.11n advance parameters dialog box appears.
IEEE 802.11n Advance Parameters
You can describe advance parameters for 802.11n.
38
3Com ® AirProtect Planner User Guide