HP AirProtect Security Software 5.5.2Sensor Repository, Modify AP, Delete AP, AMSDU, AMPDU, Modify, Delete, Add Access Point, Frame Aggregation:, MIMO configuration:, Modify Access Point

Menu and Toolbar Options

Figure 43. Adding an AP – 802.11n Advance Parameters

Define the desired 802.11n advance parameters.

•MIMO configuration: Select the MIMO configuration from the drop‐down list

•Channel width (MHz): Select the Channel width from the drop‐down list

•Guard interval (ns): Select the Guard interval from the drop‐down list

•Frame Aggregation: Select either AMSDU or AMPDU, or both checkboxes for frame aggregation.

For more details on the advance parameters, refer to Appendix D: Glossary of Terms.

Modify AP

Click <Modify> on the Access Point Repository dialog box to modify an existing AP. The Modify Access Point dialog box appears.

Figure 44. AP Repository – Modifying an AP

The Modify Access Point dialog box is similar to the Add Access Point dialog box.

Delete AP

Click <Delete> and confirm the deletion of an AP.

5.5.2Sensor Repository

Select Sensor Repository from the Tools menu.

39

3Com ® AirProtect Planner User Guide