HP Book manual To insert and remove a CD, To insert a PC card

Press the reset button.

To insert and remove a CD

When the OmniBook is reading data from the CD-ROM drive, the

CD disk indicator appears on the Status Panel.

Caution

Do not insert or remove a CD while the OmniBook is actively reading data. Wait until the CD-ROM drive is done. Otherwise, the OmniBook could stop responding.

1.Press the open button on the front of the CD-ROM drive.

2.Place the CD in the drive and gently press down to seat it on the spindle.

3.Close the door to the drive.

4.To remove the CD, press the open button on the front of the CD-ROM drive.

To insert a PC card

The OmniBook PC card slots are available for storing data and expanding the communication capabilities of the OmniBook. The OmniBook supports standard Type I, II, and III PC cards (PCMCIA and CardBus). You can use two thin cards or one thick card. The lower card slot supports Zoomed Video, which allows a zoomed video card to show high-quality multimedia presentations.

25