Display Problems, Power Problems | HP Book specification

∙If you’re running an MS-DOS program outside Windows and you need access to sound and other system devices, use the special MS-DOS Mode command:

Click Start, Programs, OmniBook, MS-DOS Mode. This shuts down Windows and loads drivers for MS-DOS. When you're done, type exit to restart Windows.

Display Problems

If the display works improperly

∙Check whether the display resolution is set to its default setting, 800 x 600 (SVGA) or 1024 x 768 (XGA).

You can use HP User Tools.

∙Try changing the display resolution to the standard VGA option.

If the screen is difficult to read

∙Try adjusting the display controls.

∙If the OmniBook is cold, allow it to warm up.

If the display scrolls when the pointer reaches the edge

∙A high-resolution display setting is active. You can use a high-resolution external display and turn off the OmniBook display by pressing Fn+F5, or you can choose the default OmniBook display setting.

Power Problems

If you have power problems that interfere with turning on or starting the OmniBook, see the troubleshooting chapter in the OmniBook Installation and Setup Guide, which came with the OmniBook.

If the battery runs down too fast

∙Try conserving power using any of the suggestions listed under “To save battery power”

∙Check your power management settings using the System Configuration Utility. Make sure the OmniBook is set up so it can automatically change from Suspend to Hibernate.

∙If the operating time has gotten shorter and the battery pack is more than a year or two old, you may need a new battery pack.

If the OmniBook turns off immediately after it turns on

∙Battery power is probably extremely low. Plug in the ac adapter, or make sure the OmniBook isn’t turned on and insert a fresh battery—see “To replace the battery.”

If the OmniBook doesn’t suspend automatically

∙If the ac adapter is connected, the OmniBook doesn’t suspend.

∙If you have a connection to another computer, the OmniBook doesn’t suspend if the connection is actively in use.

62

Image 62

HP Book manual Display Problems, Power Problems

Contents

HP OmniBook 2000/5700 User’s Guide Windows Managing Battery Power Changing the Configuration Finding More Information Using This Online ManualHP OmniBook 2000/5700 User’s Guide Page Getting Comfortable Identifying Parts of the OmniBookPage Hint Adjusting the DisplayTo adjust the display To use the pointing device Using the Pointing DeviceTo clean the pointing device Page To connect a microphone, speakers, or headphones Using SoundTo adjust the speaker volume To record and play sound To tilt the keyboard Using the OmniBook KeyboardTo use special features of the OmniBook keyboard Fn combination keys ALT GR key Learning About Windows To learn about Windows Operating the OmniBook Checking the Status of the OmniBook Reminds you that the state To stop the OmniBook Starting and Stopping the OmniBookTo start the OmniBook Automatically turns off when you shut down Windows To reset and restart the OmniBook Hint Using Storage Devices To install the floppy drive To remove the CD-ROM or floppy drive To install the CD-ROM drive To insert and eject a floppy disk To insert and remove a CD To insert a PC card About RAM Cards Start popupEnd popup To remove a PC card To get the battery status Managing Battery PowerMonitoring Battery Power To recharge the battery or run on ac power Recharging and Replacing Batteries To replace the battery To install a second battery To save battery power Controlling Battery PowerTo respond to a low-battery warning To change how power is managedPage To attach a security cable Protecting Your OmniBookAttaching a Security Cable To record your name or other PC identification Setting Up Password ProtectionTo set up password security Hint To delete a password Type of Protection Steps To delete a set of OmniBook files To repair and clean up a diskProtecting Your Data Using the Personal Information Applications To view your appointments Managing Your Time with Appointment BookTo start Appointment Book To add a new event To change to a different day, month, or yearTo add a new appointment To delete an appointment or event To run a program automatically To add a person to the list Listing People in Phone BookTo start Phone Book Hints To search for a person To perform a math function on one number Getting Answers from HP Financial CalculatorTo start HP Calculator To do simple arithmetic Page Changing the Configuration Other To run HP User Tools Using HP User ToolsSetup Information Advanced To run the SCU without rebooting Using the System Configuration UtilityTo run the SCU during reboot System menu Disks menu Power menu Input/Output menu Exit menu System Memory System ResourcesSystem Interrupts System Input/Output Addresses 100-3FF DMA Channels Printing Problems Hint TroubleshootingSolving Problems If a serial printer doesn’t print Memory Problems Pointing Device and Mouse Problems If drive C has problems File, Drive, and PC Card ProblemsIf the OmniBook doesn’t reboot successfully from drive a If a PC card doesn’t work properly in a card slot Serial and Infrared Communications Problems Sound Problems Display Problems Power Problems If the battery pack doesn’t charge or stops charging If the OmniBook doesn’t turn on with a fresh batteryIf the OmniBook reboots every time you turn it on If your OmniBook password doesn’t work If an application stops responding Lockup ProblemsIf the OmniBook stops responding during startup If a screen saver causes lockupPage Page Page Page Volume