other keys flushed.
Failure Message | Error Code | Meaning |
User Aborted | 1 | User aborted test. |
CD Not Ready | 2 | CD not ready, no CD in drive |
H/W Error | 3 | Timeout waiting for IRQ |
Drive Not | 4 | CD drive not installed |
Present |
|
|
Read Error | 5 | The read failed |
SCSI - (SCSI.EXE)
NOTE: | The OmniBook must be docked for this test to function properly. |
The SCSI test checks for the presence of the PCI BIOS and SCSI controller. The test then checks for the presence of a SCSI hard disk, resets it, and copies the file SCSI.EXE to it.
DOS Parameter | Explanation |
|
none |
|
|
|
|
|
Valid Keystrokes | Action |
|
n/a | The SCSI test ignores the keyboard. | |
|
|
|
Failure Message | Error Code | Meaning |
User Aborted | 1 | User aborted test. |
Failed | 2 | File copy to SCSI hard drive |
|
| failed |
Failed | 3 | PCI BIOS not present |
Failed | 4 | SCSI controller not present |
Failed | 23 | Error resetting the SCSI hard |
|
| drive |
Fan - (FAN.EXE)
The Fan test is not available on the OmniBook 5500. This test turns on the fan for the specified number of seconds. In the DIAG user interface, the Enter key instructs the test to run the fan for two seconds, while
DOS Parameter | Explanation |
n | Number of seconds to run the fan |
| (default=5) |
|
|
Valid Keystrokes | Action |
any key | Any key aborts the Fan test. |
43