HP Omni BOOK 2000 Setting, Default, Comment, OmniBook, Parameters, only on the OmniBook, not available on the, selected. This setting, This setting is available

Table 11 - Input/Output Menu Settings

Setting	Parameters	Default	Comment
COM Ports…
Serial Port:	None	COM1, Addr 3F8, IRQ 4
	COM1, Addr 3F8, IRQ 4
	COM2, Addr 2F8, IRQ 3
	COM3, Addr 3E8, IRQ 4
	COM4, Addr 2E8, IRQ 3
IR Port	None	COM2, Addr 2F8, IRQ 3
	COM1, Addr 3F8, IRQ 4
	COM2, Addr 2F8, IRQ 3
	COM3, Addr 3E8, IRQ 4
	COM4, Addr 2E8, IRQ 3
LPT Port
Printer Port	None	LPT1, Addr 378
	LPT1, Addr 378
	LPT2, Addr 278
	LPT3, Addr 3BC
LPT Type
Port Definition	Standard AT (Centronics)	Bidirectional (PS-2)
	Bidirectional (PS-2)
Keyboard Setup…
Key Delay	¼ sec; ½ sec; ¾ sec; 1 sec	½ sec	Select the delay period to
			wait (after a key is
			pressed) before it will
			begin to repeat.
Key Repeat Rate	2 cps; 6 cps; 10 cps; 15	10 cps	Select the rate at which
	cps; 20 cps; 30 cps		keys will be repeated when
			they are held down longer
			than the Key Delay period.
Keyboard	Selected, Not selected	Not selected	Start computer with NUM
Numlock			LOCK enabled.
External Devices…
VGA Display	External VGA if attached,	External VGA if	When ‘External VGA…’ is
device	LCD off;	attached, LCD off;	selected, if an external
	Both external VGA and		VGA monitor is detected, it
	LCD		will be enabled and the
			LCD will be turned off.
			When ‘Both external VGA
			and LCD’ is selected, both
			are ALWAYS on.
Television Type	NTSC; PAL	NTSC	Select the television type.
			This setting is available
			only on the OmniBook
			5500.
Force recognition	Selected; Not selected	Not selected	Available only when Both
of external VGA			external VGA and LCD is
			selected. This setting
			not available on the
			OmniBook 5500.
Enable External	Selected; Not selected	Selected	When enabled, CTRL +
FN Key			ALT on external keyboard
Ignore External	Selected; Not selected	Not selected	acts as FN key.

53