HP Omni BOOK 2000 Video Memory (OB2000 & OB5700 Only), Removal Procedure, Required Equipment, Replacement Procedure, Figure 45 - Video Memory Removal

Video Memory (OB2000 & OB5700 Only)

(HP Authorized Service Providers Only)

NOTE:	Only the OmniBook 2000 and 5700 contain video memory that is replaceable.
	This repair procedure is not applicable for the OmniBook 5500.
	Also be aware that the Video Memory Board contains only 1MB of the total 2MB of
	video RAM on the system. The other 1MB of video RAM is integrated with the
	Logic PCA Board. Therefore, to replace all of the video RAM, the Logic PCA
	Board must be replaced (the replacement logic PCA will contain a new video RAM
	board).

Required Equipment

∙Small phillips screwdriver

∙5mm hexdriver

Removal Procedure

1.Exit all applications, including Windows.

2.Turn the OmniBook off and remove the battery and ac adapter.

3.Follow the Logic PCA Board Removal Procedure on page 85 to gain access to the Video Memory.

4.Remove the one necessary screw on the Logic PCA Board. See Figure 45.

5.Rock the Video Memory Board gently back and forth to remove.

Video Memory Board

F1350-60922

Video RAM Screw

F1320-60963

Figure 45 - Video Memory Removal

Replacement Procedure

91