Memory

(End User Replaceable)

Required Equipment

∙none

CAUTION: To avoid damage due to electrostatic discharge, handle the memory module by the edges only.

Removal Procedure

1.Exit all applications, including Windows.

2.Remove the ac adapter and battery from the OmniBook.

3.Turn the unit upside down and slide the memory cover off by using the two finger grips. See Figure 18 on page 52.

4.To remove the Memory Module, gently lift up the front of the module to disengage the pins.

CAUTION: If the memory module is an older model of the 32-MB RAM (see Figure 17) take care not to crimp the flex cable end when removing or replacing.

Figure 16 - 8- and 16-MB Memory ModulesFigure 17 - New and Old 32-MB Memory Module (respectively)

51