Required Equipment

∙Torx #6 screwdriver

∙5mm hexdriver (F1171 & F1175 only)

Removal Procedure

1.Follow the Display Removal Procedure to gain access to the Logic PCA.

2.For convenience, the Microphone Assembly may be removed at this point. See Figure 40.

Paw Eject Arm

(p/n F1170-40008)

Speaker

Connection

Standoffs

(p/n 0380-4606 F1171 - F1175 only)

Paw Active

Flex Cable

Connection

Paw Eject Button (p/n F1170-40005)

Microphone

Assembly

(p/n F1067-60012)

Logic PCA

(p/n F1170-60906 F1171 - F1175) (p/n F1360-60906 F1360 only)

Bottom Case

(p/n F1170- 60904

F1171 & F1175) (p/n F1360- 60904

Figure 40 - Logic PCA Removal

3.The Eject Button and Spring along with the Pivot Door and Spring do not need to be removed to replace the Logic PCA. However, both of these springs are easily dislodged at this point and can become lost. It is best to remove them and set them aside.

71