HP Cassette Player DDS-3 manual ±5. Adding a Bezel to the DDS-3 Drive

Introduction

Adding or Removing the DDS-3 Drive Bezels or Expansion Brackets

Depending on the size of the drive opening in your system, you may need to add or remove a bezel or expansion brackets to ensure that your DDS-3 drive fits in your system.

Part numbers for the HP bezels are as follows:

•

•

•

•

C1533±60104 ± 3 1/2 inch Dove Grey

C1533±60204 ± 5 1/4 inch Dove Grey

C1533±60105 ± 3 1/2 inch Flint Grey

C1533±60205 ± 5 1/4 inch Flint Grey

NOTICE: Before performing any of these changes, make sure there is not a cassette in the drive.

To add a bezel (it can be a 3.5-inch bezel, or a 5.25-inch bezel) to your drive, push the bezel onto the drive, making sure the tabs click into place. Refer to Figure 1±5.

Figure 1±5. Adding a Bezel to the DDS-3 Drive

1±14