HP CQ42-219AX, CQ42-205AU, CQ42-220AX, CQ42-218AX, CQ42-203AU, CQ42-210AU manual Hard drive

Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket.

Description	Spare part number
750–GB 5400 RPM SATA 12.7mm (for model 1.2 only)	603787-001
640-GB 5400 RPM	603785-001
500-GB 7200 RPM	608218-001
320-GB 7200 RPM	600169-001
250-GB 7200 RPM	575598-001
160-GB 7200 RPM (for models 1.0 and 1.1 only)	600167-001
Hard drive hardware kit (includes screws and hard drive bracket)	513771-001
Hard drive cable/adaptor (included in the cable kit)	610791–001

Before removing the hard drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 52).

Remove the hard drive:

1.Position the computer with the front toward you.

2.Remove the two Phillips PM2.5×5.0 screws (1) that secure the hard drive cover to the computer.

ENWW Component replacement procedures 53