Recording video clips
Your camera allows you to record video clips without sound.
1.Slide 
to 
, then press 
.
2.In the 
Picture Capture Menu, use 
to highlight
Shooting Mode, then press 
.
3. In the 
Shooting Mode menu, use 
to highlight
Video, press 
, then hold down 
until the menu disappears.
4. Frame the subject in the Image Display or the viewfinder.
5.Press the Shutter button all the way down and release to begin recording video.
6.To stop recording video, press and release the Shutter button again.
Instant Review
After you have taken a picture or recorded a video clip, the camera displays it briefly in Instant Review. If you want to delete the image or video clip, press 
, select This Image from the 
Delete menu, then press 
.
Digital zoom
In digital zoom, the Image Display shows a yellow frame around the scene and the image quality setting (MP value). As you zoom in, the scene expands to show what the camera will capture, and the MP value decreases to indicate the resolution at which the scene will be captured.
When capturing images using digital zoom, make sure that the MP value on the Image Display is appropriate for the size at which you want to print the captured image. For MP values and their recommended print sizes, see Image Quality under “Using the Picture Capture Menu” on page 11.
TIP: The more you zoom in on the subject of your picture, the more small movements of the camera are magnified (this is called camera shake). To reduce potential blur caused by these movements, hold the camera still, add more light to the scene, or steady the camera by holding it closer to your body or against a steady object, or by setting it on a tripod or stable surface.
To use digital zoom:
1.Slide 
to 
.
2.Press and hold 
until the image you want fills the yellow frame. If you zoom too far, press 
.
NOTE: Digital zoom is not available when recording video clips.
Recording video clips | 9 |
