Installation and Setup

Power Requirements

NOTE

The front panel switch is a standby switch only; it is not a LINE switch

 

(power disconnecting device).

 

 

 

 

WARNING

Install the product so that the detachable power cord is readily

 

identifiable and easily reached by the operator. The detachable

 

power cord is the product disconnecting device. It disconnects the

 

mains circuits from the mains supply before other parts of the

 

product. The front panel switch is only a standby switch and is not a

 

LINE switch. Alternatively, an externally installed switch or circuit

 

breaker (which is readily identifiable and is easily reached by the

 

operator) may be used as a disconnecting device.

 

 

 

 

CAUTION

Always use the three-prong AC power cord supplied with this product. Failure

 

to ensure adequate earth grounding by not using this cord can cause product

 

damage.

 

 

 

 

CAUTION

This analyzer has autoranging line voltage input. Be sure the supply voltage

 

is within the specified range. (Refer to the specifications guide for your

 

analyzer.)

 

 

12

Chapter 1