Options and Accessories

 

 

Options

 

 

 

Name

Option

Description

Number

 

 

 

 

 

Phase Noise

226

Option 226 is an automated phase noise (dBc/Hz)

Measurement

 

measurement solution, providing the ability to measure

Personality

 

SSB noise, RMS noise, DANL, as well as the real-time

 

 

generation of a phase noise vs. log offset frequency, and

 

 

phase noise vs. time. High Stability Frequency

 

 

Reference (Option 1D5) is recommended. Narrow

 

 

resolution bandwidth (Option 1DR) is highly

 

 

recommended. Without Option 1DR, the minimum offset

 

 

frequency will be 10 kHz.

 

 

 

Pre-amplifier

1DS

The pre-amplifier improves the analyzer’s sensitivity

 

 

(lowers the noise floor) by approximately 16 dB.

 

 

 

Rack Mount Kit with

1CP

Option 1CP provides the parts necessary to mount the

Handles

 

analyzer in a standard 19 inch (482.6 mm) equipment

 

 

rack. It includes front handles and rack slides for added

 

 

convenience. Rack mount height is 8.75 in (222.3 mm).

 

 

 

RF and Digital

B74

Option B74 includes the RF Communications Hardware

Communications

 

(Option B7E), Digital Signal Processing and Fast ADC

Hardware

 

(Option B7D), Time-Gated Spectrum Analysis (Option

 

 

1D6), Memory Extension (Option B72), High Stability

 

 

Frequency Reference (Option 1D5), Preamplifier (Option

 

 

1DS), and Narrow Resolution Bandwidth (Option 1DR)

 

 

assemblies. These options are required for optimum

 

 

performance of the cdmaOne (Option BAC) or GSM

 

 

measurement personality (Option BAH).

 

 

 

RF Communications

B7E

Option B7E provides the communications hardware

Hardware

 

required for many digital communication

 

 

measurements. Option B7E must be ordered with

 

 

Option B7D (digital signal processing and fast ADC) and

 

 

Option 1D5 (high stability frequency reference). This

 

 

provides burst carrier trigger capability.

 

 

 

RS-232 and Parallel

1AX

Option 1AX allows you to control your analyzer from a

Interface

 

computer that uses an RS-232 interface. It includes a 2.5

 

 

meter 9-pin (f) to 9-pin (f) connector RS-232 cable

 

 

(Agilent 5182-4794), a parallel interface connector for

 

 

printers, a CD-ROM containing IntuiLink Toolbar

 

 

software, and the programmer’s guide for your analyzer.

 

 

This program allows you to download spectrum analyzer

 

 

display or data files to a personal computer using

 

 

Microsoft Word or Microsoft Excel. IntuiLink Toolbar

 

 

installation instructions are included with the CD-ROM.

 

 

Option 1AX allows the analyzer to copy its display to a

 

 

printer.

 

 

 

Chapter 5

81