In Case of Difficulty

Before Calling Agilent Technologies

Perform an Alignment. Press System, Alignments, Align Now, All.

If the previously performed alignments did not resolve the problem, press System,

Alignments, Load Defaults. Then press System, Alignments, Align Now, All.

Is the analyzer displaying an error message? If so, refer to the Instrument Messages and Functional Tests manual.

If the necessary equipment is available, perform the functional tests in the Instrument Messages and Functional Tests document for your analyzer.

TIP

You can get automatic electronic notification of new firmware releases and

 

other product updates/information by subscribing to the Agilent Technologies

 

Test & Measurement E-Mail Notification Service for the PSA or ESA Series at

 

http://wwwdb.tm.agilent.com/cgi-bin/notification/user.pl

 

 

Chapter 6

91