HP E4402B, E4403B, E4404B, E4405B, E4407B, E4408B, E4411B 79

			Options and Accessories
			Options

	Name	Option	Description
	Name	Number	Description
		Number

	High Stability	1D5	Option 1D5 improves the frequency reference accuracy.
	Frequency Reference		The analyzer’s synthesizer is phase locked to an oven
			controlled crystal oscillator (OCXO), instead of the
			standard VCXO. When present with narrow resolution
			bandwidth (Option 1DR) it provides 1 Hz and 10 Hz
			resolution bandwidths.

	IF, Sweep and Video	A4J	Option A4J provides the analyzer with additional inputs
	Ports		and outputs. They are as follows: SWP OUT, HI SWP
			OUT (TTL), HI SWP IN (TTL), AUX VIDEO OUT, and
			AUX IF OUT.
			SWP OUT - sweep ramp output, provides a voltage ramp
			proportional to the sweep of the analyzer (0 V to 10 V).
			HI SWP OUT (TTL) - provides the HI SWP TTL signal
			as an output (TTL high during a sweep, TTL low during
			a retrace). It indicates when the analyzer is sweeping.
			HI SWP IN (TTL) - allows external sweep control. It can
			be grounded to stop sweeping.
			AUX VIDEO OUT - provides detected video output
			(before the analog-to-digital conversion) proportional to
			vertical deflection of the trace.
			AUX IF OUT - provides a 50 Ω , 21.4 MHz IF output that
			is the down-converted signal of the RF input of the
			analyzer.

	Low Emission	060	Option 060 provides reduced radiated and conducted
			emissions to comply with EN55011 Class B
			requirements. This option applies during ac operation
			only.
			Option 060 is incompatible with TV Trigger (Option
			B7B).

	Low Frequency	UKB	Option UKB extends the frequency range of the analyzer
	Extension		on the low end to 100 Hz when DC coupling is selected.
			This option requires installation of Option 1DR and is
			only available on ESA models E4402B, E4404B, E4405B,
			and E4407B.

Chapter 5

79

Contents

Getting Started Guide Notice Additional Information 1. Installation and Setup 2. Front and Rear Panel Features 3. Making a Basic Measurement 4. Viewing Catalogs and Saving Files 5. Options and Accessories 6. In Case of Difficulty 1Installation and Setup Page Initial Inspection Page If There Is a Problem Power Requirements Checking the Fuse AC Power Cord Page Table 1-3.AC Power Cords Page Turning on the Analyzer for the First Time Why Aren’t All the Personality Options Loaded in Memory Using an External Reference Firmware Revision TIP Running Internal Alignments Printer Setup and Operation Interconnection and Setup Testing Printer Operation Protecting Against Electrostatic Discharge Legal Information Page 2Front and Rear Panel Features 2.1.1 Front-PanelConnectors and Keys Media Door Earphone Data Control Keys Knob Numeric Keypad Step Keys Option 1DP for Option 1DQ 2.1.2 Display Annotations Screen Annotation (Continued) Page Rear-PanelFeatures 2.2 Rear-PanelFeatures Service Connector Inputs/Outputs Agilent ESA-LSeries (E4403B, E4408B, E4411B) Slot # Agilent ESA-ESeries (E4401B, E4402B, E4404B, E4405B E4407B) IF, Video, and Sweep Ports FM Demod Frequency Extension Assembly Card Slot Identification Numbers Power On Selection Power Always On Power Norm Page Key Overview 2.3 Key Overview Page Front and Rear Panel Symbols 2.4 Front and Rear Panel Symbols 3Making a Basic Measurement Basic Assumption Using the Front Panel Entering Data Using Menu Keys Presetting the Spectrum Analyzer Creating a User Preset Viewing a Signal Figure 3-110 MHz Internal Reference Signal and Associated Spectrum Setting Frequency Span Figure 3-2Span Changed to 50 MHz Reading Frequency & Amplitude Esc Changing Reference Level Page Improving Frequency Accuracy Valid Marker Count Range Figure Increasing Marker Frequency Accuracy Figure 3-6Using Marker Counter 4Viewing Catalogs and Saving Files Page File Menu Functions Locating and viewing files in the catalog Figure 4-1.Catalog Menu Creating a directory Formatting a Floppy Disk Saving a File Step 1. Set up the analyzer trace Figure 4-3.Viewing Trace Figure 4-4.Viewing Traces 1 and Step 2. Save the file Saving Now Loading a file Figure 4-7.Verifying Trace Renaming a File Copying a File Deleting a File Using the Alpha Editor 5Options and Accessories Ordering Options and Accessories Options Page Option Descriptions Page Page Page Page Page Page Page Page Page Page Page Accessories 50 Ohm/75 Ohm Minimum Loss Pad 75 Ohm Matching Transformer AC Probe AC Probe (Low Frequency) Carrying Strap (Part Number E4401-60028) External Keyboard GPIB Cable HP/Agilent 11970 Series Harmonic Mixers HP/Agilent 11974 Series Preselected Millimeter Mixers Agilent E1779A Battery Pack Parallel Interface Cable Printer RF and Transient Limiters RF Bridges RS-232Cable Static Safe Accessories 6In Case of Difficulty No operator serviceable parts inside. Refer servicing to qualified personnel. To prevent electrical shock, do not remove covers Types of Spectrum Analyzer Messages Before Calling Agilent Technologies Check the Basics Page Read the Warranty Service Options Calling Agilent Technologies Table 6-2.Contacting Agilent Technologies Returning an Analyzer for Service FRAGILE, HANDLE WITH CARE Page Index Index-97 Index-98 Index-99