
e.Flex the inside edges of the top edge (3), the left and right sides (4), and the bottom edge (5) of the display bezel until the bezel disengages from the display enclosure. The display bezel is available using spare part number
4.If it is necessary to replace the webcam/microphone module:
a.Detach the webcam/microphone module (1) from the display enclosure. (The webcam/ microphone module is attached to the display enclosure with adhesive.)
b.Disconnect the cable (2) from the webcam/microphone module.
The webcam module is available using spare part number
5.If it is necessary to replace the display panel:
Component replacement procedures 33