HP gnu source-level debugger 5992-4701 manual Inline Debugging in Integrity Systems

3.You can use the following commands for debugging inline functions in HP 9000 systems:

step next list backtrace frame <n> info locals info args

The following commands are not available for debugging inline functions in HP

9000 systems:

breakpoint info frame disassembly

NOTE: Inline debugging commands are not available for inlined template functions and inlined functions which are defined after the call site.

14.8.2 Inline Debugging in Integrity Systems

In Integrity systems, applications that are compiled with -g option support inline debugging by default. Compiler versions A.06.02 and later support the inline debugging feature in Integrity systems and require no additional options.

WDB 5.6 and later versions enable you to set and modify breakpoints in inline functions for programs compiled with optimization level less than +O2. The breakpoint features for inline functions are introduced as additional options in the set inline-debug command.

You can toggle the options for inline debugging by entering either of the following commands:

(gdb) set inline-debug <option> or

$ gdb --inline= <option>

The following options available for the set inline-debugcommand:

•on

•off

•inline_bp_all

•inline_bp_individual

The set inline-debugon command enables the inline debugging feature without the inline breakpoints options in Integrity systems. This command is enabled by default.

14.8 Inline Support 151