HP gnu source-level debugger 5992-4701 manual break-insert command, Result

Example

N.A.

The -break-insert command

Synopsis

-break-insert [ -t ] [ -h ] [ -r ] [ -c condition ] [ -i ignore-count] [ -p thread ] [ line addr ]

If specified, line, can be one of:

•function

•filename:linenum

•filename:function

•*address

The possible optional parameters of this command are:

'-t'	Insert a temporary breakpoint.
'[-h]'	Insert a hardware breakpoint.
'[-ccondition]'	Make the breakpoint conditional on condition.
'[-iignore-count]'	Initialize the ignore-count.
`-r'	Insert a regular breakpoint in all the functions whose
	names match the given regular expression. Other flags
	are not applicable to regular expression.

Result

The result is in the form:

^done,bkptno="number",func="funcname", file="filename",line="lineno"

where number is the GDB number for this breakpoint, funcname is the name of the function where the breakpoint was inserted, filename is the name of the source file which contains this function, and lineno is the source line number within that file.

NOTE: This format is open to change.

GDB command

The corresponding GDB commands are 'break', 'tbreak', 'hbreak', 'thbreak', and 'rbreak'.

Example

(gdb)

-break-insert main

316 The GDB/MI Interface