HP gnu source-level debugger 5992-4701 manual Scrolling panes, Changing the register display

(gdb) la split

(gdb) la regs

(gdb) la src

(gdb) la regs

(gdb) foc next

Focus set to REGS window. (gdb)

15.6 Scrolling panes

To scroll within a pane, you can use the arrow keys or the Page Up and Page Down keys (on some keyboards these are Prev and Next). You can also use the following commands:

{+ -} [num_lines]	Vertically scroll the pane forward (+) or backward
[win_name]	(-). + or - with no arguments scrolls the pane
	forward or backward one page. Use num_lines
	to specify how many lines to scroll the pane. Use
	win_name to specify a pane other than the one
	with logical focus.
{< >} [num_char]	Horizontally scroll the pane left (<) or right (>)
[win_name]	the specified number of characters. If you do not
	specify num_char, the pane is scrolled one
	character.

Note that a space is required between the +, -, <, or > and the number.

To scroll the command pane, use the scroll bars on the terminal pane.

15.7 Changing the register display

To look at the floating-point or special registers instead of the general registers, and then to return to the general registers, you can use the following XDB commands:

fr, display $fregs	Display the floating-point registers.
sr, display $sregs	Display the special registers.
gr, display $gregs	Display the general registers.

For example, if you use the fr command, the window looks like this:

-------------------------------------------------------------------------
flags 29000041			r1	51a800	rp 7f6ce597
r3	7f7f0000		r4	1	r5 7f7f06f4
r6 7f7f06fc			r7	7f7f0800	r8 7f7f0800
r9	40006b10		r10	0	r11	40004b78
r12	1		r13	0	r14	0
r15	0		r16	40003fb8	r17	4
:	......................................................................						:
:30		{					:
:31		/* Try two test cases. */					:

250 The HP-UX Terminal User Interface