Using the Fingerprint Reader
Set “PIN AND fingerprint” for Logon
In this mode, you are required to enter both a PIN and a fingerprint to logon.
1.From the Start menu, tap Settings, then Password.
2.Select “PIN AND fingerprint” from down arrow list.
3.Select from the down arrow list the length of time the
iPAQ Pocket PC can remain unused before you must reenter the PIN.
4.Tap 4 digits in the PIN field.
5.Tap OK or ENTR.
6.Tap the finger to enroll.
7.Swipe the selected finger, as instructed.
✎For more information on finger swiping, see the section “Enroll a fingerprint” or tap the Training button.
8.Tap OK.
9.Tap Yes to save changes.
Set “Password OR fingerprint” for Logon
In this mode, you are required to enter an alphanumeric password with at least seven characters or a fingerprint to logon.
✎The alphanumeric password must contain a combination of upper and lower case letters, numbers, and punctuation.
1.From the Start menu, tap Settings, then Password.
2.Select “Password OR fingerprint” from the down arrow list.
Reference Guide |