HP iPAQ H5400 Add a Device, Back, Nevo, Start, Cancel, Wrench, Add Device, Add Device, Add Devices, Add Activities

Using the Universal Remote

Add a Device

You must add a device to the wheel before you can control it with the universal remote. You can set up the universal remote to control up to 12 devices in a room.

The universal remote comes pre-programmed with codes for

thousands of infrared supported devices. You can download other codes from the Nevo Web site, http://www.mynevo.com.

You can automatically transfer all the remote control settings to your iPAQ Pocket PC.

✎The first time you use the universal remote, you will only see the Add Devices and Add Activities icons on the device wheel.

A wizard guides you through the process of adding a device. To exit the wizard at any time, tap the Cancel button. To return to the previous page, tap the Back button.

To add a device:

1.From the Start menu, tap Nevo.

2.Select one of the following:

a.Tap the Add Device icon.

b.Tap the Wrench icon, then Add Device.

Reference Guide 10–3