Using the Fingerprint Reader

Logon Using a Password or Fingerprint

You must enter a password or swipe the finerprint you entered during setup.

1.Turn on your iPAQ Pocket PC.

2.Enter your password or swipe your enrolled finger.

To type letters, numbers, or punctuation, tap the Keyboard button at the bottom right corner of the screen. If you do not enter the correct password, you will be prompted to try again.

3.Swipe your fingerprint if you did not enter your password.

Logon Using a Password and Fingerprint

You must enter both a password and swipe the fingerprint you entered during setup. iPAQ Fingerprint Reader remembers your logon preference.

The next time you logon, the Password or Fingerprint screen corresponding to your last logon will be displayed.

1.Turn on your iPAQ Pocket PC.

2.Enter your password.

Iftryyouagain.do not enter the correct password, you will be prompted to

3.Tap OK.

4.Swipe your enrolled finger.

Reference Guide

5–19

Page 147
Image 147
HP H5400 manual Logon Using a Password or Fingerprint, Logon Using a Password and Fingerprint