HP J9079A manual 14

Using the ProCurve Web Browser Interface

Using the ProCurve Web Browser Interface

Navigating the Web Browser Interface

	Menu	Description	Page
	TRUNKS		2-16
	Membership	Selects ports to group into static trunks.	2-16
	Configuration	Configures static trunk connection settings.	2-19
	LACP Setup	Configures Link Aggregation Control Protocol (LACP) on	2-20
		the switch.
	LACP Status	Displays aggregation information and LACP port status.	2-23
	VLANS		2-25
	VLAN Setup	Create up to 64 VLANs.	2-25
	VLAN Port Config	Configures VLAN behavior for individual ports and	2-27
		trunks.
	LLDP		2-30
	Configuration	Configures Transmitted TLVs settings and LLDP state.	2-30
	Neighbor	Monitors LLDP neighbor information.	2-32
	SNMP		2-33
	Configuration	Configures the Simple Network Management Protocol.	2-33
	DIAGNOSTICS		2-33
	Ping Test	Sends a ping to other devices from the switch.	2-33
	Factory Defaults	Force the switch to perform a power reset and restore	2-35
		the original factory settings.
	Reboot Switch	Reboots the switch.	2-36
	SUPPORT		2-36
	Configuration File	Upload or download the switch configuration file.	2-36
	Update Software	Updates the switch system software using a file	2-38
		provided by ProCurve Networking.
	ProCurve Web Site	Link to ProCurve Networking Web site.	2-39
	LOGOUT	Quits to the Login page.
N o t e	The ProCurve Switch 1700 supports pass through (flooding) of spanning tree
	BPDUs so that upstream devices on the network which support Spanning Tree
	Protocol can detect loops that exist on the ProCurve Switch 1700 interface.

2-4