Using the ProCurve Web Browser Interface

Web Configuration

Web Configuration

Displaying System Information

You can display a complete summary of identity, IP Address, port, Trunk/LACP, and VLAN information for the switch.

Field Attributes

System Identity

•System Name – Name assigned to the switch system.

•System Location – Description of the switch location.

•System Contact – Contact information assigned to the switch.

•Number of Ports – Number of built-in ports.

•Hardware Version – Hardware version of the main board.

•Software Version – Version number of the code.

•Serial Number – The serial number of the switch.

Address Information

•Management VLAN – ID of a configured VLAN. By default, all ports on the switch are members of VLAN 1. However, the management station can be attached to a port belonging to any VLAN, as long as that VLAN has been assigned an IP address.

•IP Address – Address of the VLAN to which the management station is attached. (Note that the management station must always be in the Management VLAN.)

•Subnet Mask – This mask identifies the host address bits used for routing to specific subnets. (Default: 255.255.255.0)

•Gateway IP Address – IP address of the gateway router between the switch and management stations that exist on other network segments. (Default: 0.0.0.0)

•MAC Address – The physical layer address of the switch.

Port Information

•Port – Indicates the port number.

•Type – Indicates the port type (10/100-T, 10/100/1000-T, or M).

•Link Status – Indicates if the link is Up or Down.

Web ProCurve the Using Interface Browser

2-5