Using the ProCurve Web Browser Interface

Web Configuration

Web – Click Trunks, Membership. To assign a port to a trunk, click the required trunk number, then click APPLY.

Web ProCurve the Using

Interface Browser

Trunk Configuration

You can use the Trunk Configuration page to manually set the speed, duplex mode, and flow control.

Modifying Trunk Settings

1.On the Trunks Configuration page, modify any of the following settings:

•Speed Duplex – Allows auto-negotiation to be enabled or disabled. When auto-negotiation is disabled, you can force the settings for speed, duplex mode, and flow control.

•Flow Control – Allows automatic or manual selection of flow control.

2.Click APPLY.

2-19