Manuals / Brands / Computer Equipment / Switch / HP / Computer Equipment / Switch

HP J9079A Getting Started, Introduction, Related Publications, This, Release Notes, ProCurve Switch, Started Getting, ■ProCurve Switch, ■ProCurve Switch

1 57

Download 57 pages, 822.34 Kb

1

Getting Started

Introduction

This Management and Configuration Guide is intended to support the following switches:

■ProCurve Switch 1700-8

■ProCurve Switch 1700-24

This guide describes how to use the Web browser interface to configure, manage, and monitor switch operation. A troubleshooting chapter is also included.

Related Publications

Installation and Getting Started Guide. Use the Installation and Getting Started Guide shipped with your switch to prepare for and perform the physical installation. This guide also steps you through connecting the switch to your network and assigning IP addressing, as well as describing the LED indications for correct operation and trouble analysis.

You can download a copy of this guide from the ProCurve Networking Web site, http://www.hp.com/go/procurve. (See “Getting Documentation From the Web” on page 1-2.)

Release Notes. Release notes are posted on the ProCurve Networking Web site and provide information on new software updates:

■New features and how to configure and use them■Software management, including downloading software to the switch■Software fixes addressed in current and previous releases

To view and download a copy of the latest release notes for your switch, see “Getting Documentation From the Web” on page 1-2.

Started Getting

1-1

Contents

HP ProCurve 1700 Switches July Page HP ProCurve 1700 Switches Management and Configuration Guide Page Contents Download Text Readable Configuration/Status File 3 Troubleshooting Index Getting Started Introduction Related Publications Getting Documentation From the Web Sources for More Information To Set Up and Install the Switch in Your Network Page Using the ProCurve Web Browser Interface Overview Navigating the Web Browser Interface Home Page Configuration Options Panel Display Main Menu Page Web Configuration Displaying System Information Speed/Duplex Status Flow Control Status Auto-negotiation Frame Type PVID Web - Click System, Information Web ProCurve the Using Interface Browser Displaying the System Name Setting the Switch’s IP Address • Gateway IP Address – IP address of the gateway router between this device and management stations that exist on other network segments. (Default: 0.0.0.0) procedure described in the “Troubleshooting” section start a new session using the new IP address Configuring the Logon Password Rate Limits Port Configuration Port Mirroring Web – Click Ports, Port Mirroring Showing Port Statistics Trunk Membership Aggregation Mode Defining the Members of a Trunk Deleting the Members of a Trunk Trunk Configuration Modifying Trunk Settings LACP Settings Enabling LACP Disabling LACP Web – Click Trunks, LACP Setup LACP Status Web – Click Trunks, LACP Status VLAN Setup Introduction to VLANs Creating a VLAN Modifying a VLAN Deleting a VLAN VLAN Port Config • VLAN Aware Enabled – VLAN aware ports are able to use VLAN VLAN Aware Enabled tagged frames to determine the destination of the frame. Click to enable or disable VLAN awareness mode for this port (Default: Enabled) Web – Click VLANS, VLAN Port Config LLDP Configuration Web – Click LLDP, Configuration LLDP Neighbor Table SNMP Configuration Ping Test Status Received replies Request timeouts •Average Response Time (in ms) – Average response time of all the packets Restore to Factory Defaults Reboot Switch Upload/Download Configuration Download Text Readable Configuration/Status File Update Software Support Page Troubleshooting Basic Troubleshooting Tips Forgotten the IP Address or Password Testing the Switch by Resetting It ProCurve Networking Customer Support Services Before Calling Support Page Index Index-2 ProCurve 5400zl Switches Installation and Getting Startd Guide Technology for better business outcomes To learn more, visit www.hp.com/go/procurve *5991-6222